+52 (1) 669 133 2505 +52 (1) 669 159 0889 info@agroexpertjuscafresa.com
Manure spreaders / muck spreaders agricultural trailers Juscafresa.
Destined for large agriculture works / farms.
Stands out for its excellent spread quality and high load capacity.
Standard equipped with:
Drag system 4 chains 80/12 C 10 + S 275 JR or 80/12X 20 Mn 4 + S 355 JR
Veritcal beaters of 2 columns chopping type group P 540/390 rpm with screwing flat spikes and height 2200 mm
Hydraulic back cover with vertical opening type guillotine with cylinder compensation system
Drawbar with parabolic transversal springs of 3 leaves
Capacity: 13,15 - 15,82m3
MODELS
E87LMP2
E88LMP2
E92LMP2
13,17m3
14,50m3
15,82m3
E87LMP2005 | E88LMP2005 | E92LMP2005 | |
---|---|---|---|
m3 | 13,17 | 14,5 | 15,82 |
A | 7802 | 8302 | 8802 |
B | 6308 | 6808 | 7308 |
C | 2447 | 2447 | 2447 |
D | 1900 | 1900 | 1900 |
E | 1754 | 1954 | 2325 |
F | 1380 | 1380 | 1380 |
G | 3018 | 3018 | 3018 |
H | 450 | 450 | 450 |
I | 1300 | 1300 | 1300 |
J | 3260 | 3260 | 3260 |
K | 4748 | 5048 | 5177 |
U | 4966 | 5466 | 4966 |
X | 2130 | 2130 | 2130 |
wheel | 1070 | 1070 | 1070 |
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.
Spreader system
Veritcal beaters of 2 columns chopping type with screwing flat spikes.
Serial speed 540/390rpm or optional 1000/566rpm or 1000/405rpm.
The lower plates are protected by plates in order to avoid the material fall directly to the floor and ensuring it is spread through the back without falling below the machine and getting it dirty.
Symetrical star shape of Beaters and serial screwing flat spikes.
Serial speed 540/390rpm or optional 1000/566rpm or 1000/405rpm.
Spikes
Screwing flat spikes for serial beaters or screwing hand duck spikes for optional beaters.
The screwing hand duck are essential for spreading dry and fine manure without weight like manure hens.
Material steel
4mm side thickness of standard or 5mm optional and 4mm floor thickness.
Drive shaft Bondioli & Pavesi
Homokinetic joint front transmission and overrunning clutch and back transmission with friction disk clutch.
Drag system
Kit of 4 chains 80/12 manufactured with material C10 + S275 JR for models E87LMP2 of standard and kit of 4 chains 80/12X manufactured with material 20Mn4+S355JR for models E88LMP2 and E92LMP2 of standard.
Kit of 4 chains 80/18W manufactured with material 27 Mn Cr B5-2 + Hardox 450 optional on the models E88LMP2 and E92LMP2.
Manual independents tensors.
Reducer
Hydraulic advance chains with reducer 1/24,3.
Velocity commandment from the chains
Manual velocity commandment from the chains floor.
Cover
Hydraulic back cover opening type guillotine with cylinders compensation system optional.
The vertical opening type guillotine can add an indicator door opening for hydraulic back cover.
Channelers sheets
Channelers sheets of manure to direct it where we want.
Lateral height extension panels optional
Laterals height extension panels for forage and cereal 0,4m.
Drawbar and jack-stand
Drawbar with springs of parabolic 3 leaves with hydraulic jack-stand with manual pump.
Axle
Square rocker axle 100 mm, 1900 track, 10 bolts, brakes 400x80.
Optional wheels
E87LMP2005 | E88LMP2005 | E92LMP2005 | |
---|---|---|---|
385/65 R 22,5 | O | O | - |
445/65 R 22,5 | - | - | O |
560/45 R 22,5 | O | O | - |
560/60 R 22,5 | - | - | O |
“A higher quality finish means more machine life”
The Juscafresa finishing process is:
-Polishing of the whole machine removing the impurities that persist in the metal.
-Pressurized washing with degreaser solution to obtain a better grip on the primer and prevent corrosion.
-Wash at high pressure with hot water to remove dirt from the metal and remains of adhered products.
-Application of a high quality primer layer.
-Application of two layers of Juscafresa paint specially designed with our corporate color.
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.