LMB2

LIGHT MAXI BASIC

Manure spreaders / muck spreaders agricultural trailers Juscafresa.
Destined for medium agriculture works / farms.

Stands out for its excellent spread quality and for its easy maneuvering.

Standard equipped with:
Drag system 2 or 4 chains 80/12 C 10 + S 275 JR
Veritcal beaters of 2 columns chopping type group B 540/330 rpm with screwing flat spikes
Hydraulic back cover with vertical opening type guillotine with cylinder compensation system
Silentblock drawbar or drawbar with parabolic transversal springs of 2 leaves

Capacity: 6,00 - 13,11m3

MODELS

E55LMB2

E58LMB2

E63LMB2

6,00m3

8,50m3

9,40m3

11,91m3

E87LMB2

E88LMB2

13,11m3

Dimensiones

	E55LMB2151	E58LMB2143	E63LMB2143	E87LMB2005	E88LMB2005
m3	6	8,5	9,4	11,91	13,11
A	6178	6478	6976	7746	8246
B	4919	5219	5719	6248	6748
C	2376	2376	2376	2285	2285
D	2000	2000	2000	1900	1900
E	1719	1819	2019	1694	1894
F	990	990	990	990	990
G	2149	2449	2449	2804	2804
H	450	450	450	450	450
I	-	-	-	1300	1300
J	2582	2882	2882	3240	3240
K	4459	4659	4967	4752	5052
U	3744	3992	4492	4992	5492
X	1730	1730	1730	1930	1930
wheel	1070	1070	1070	1070	1070

Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.

Características

Spreader system

Veritcal beaters of 2 columns chopping type with screwing flat spikes.

Serial speed 540/330rpm.

The lower plates are protected by plates in order to avoid the material fall directly to the floor and ensuring it is spread through the back without falling below the machine and getting it dirty.

Symetrical star shape of Beaters and serial screwing flat spikes.

Serial speed 540/330rpm.

Spikes

Screwing flat spikes for serial beaters.

Material steel

4mm side thickness of standard and floor thickness of 3mm for the models E55LMB2, E58LMB2 and E63LMB2 and 4mm for the models E87LMB2 and E88LMB2.

Drive shaft Bondioli & Pavesi

Security screw of standard or homokinetic joint optional front transmission and overrunning clutch and back transmission with overrunning clutch.

Drag system

Kit of 2 or 4 chains 80/12 manufactured with material C10 + S275 JR.

Manual independents tensors.

Reducer

Hydraulic advance chains with reducer 1/16,4 for the models E55LMB2, E58LMB2 and E63LMB2 and 12,1 for the models E87LMB2 and E88LMB2.

Velocity commandment from the chains

Manual velocity commandment from the chains floor.

Cover

Hydraulic back cover opening type guillotine with cylinders compensation system optional.

Channelers sheets

Channelers sheets of manure to direct it where we want.

Drawbar and jack-stand

Silentblock drawbar with for models E55LMB2, E58LMB2 and E63LMB2; and drawbar with springs of parabolic 3 leaves for models E87LMB2 and E88LMB2.

Mechanic jack-stand of standard or jack-stand with manual pump optional.

Mobil drawbar with hydraulic cylinder optional for models E55LMB2, E58LMB2 and E63LMB2.

Axle

Available in models E55LMB2.

Square straight axle 70 mm, 2000 track, 6 bolts, brakes 300x60.

Available in models E58LMB2 and E63LMB2.

Square straight axle 100 mm, 2000 track, 8 bolts, brakes 400x80.

Available in models E87LMB2 and E88LMB2.

Square rocker axle 100 mm, 1900 track, 10 bolts, brakes 400x80.

Optional wheels

	E55LMB2151	E58LMB2143	E63LMB2143	E87LMB2005	E88LMB2005
385/65 R 22,5	O	O	O	O	O

“A higher quality finish means more machine life”

The Juscafresa finishing process is:

-Polishing of the whole machine removing the impurities that persist in the metal.

-Pressurized washing with degreaser solution to obtain a better grip on the primer and prevent corrosion.

-Wash at high pressure with hot water to remove dirt from the metal and remains of adhered products.

-Application of a high quality primer layer.

-Application of two layers of Juscafresa paint specially designed with our corporate color.

Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.

Galeria

LMB2

1/22

Vídeos