SCDB

Unifeeds / mixers agricultural trailers Juscafresa.

Destined to ensure quick, homogeneous and fluffy mixture of various products for prepare a ration of food with the goal of obtain the best results in terms of livestock production and livestock health.

Stands out for its vertical system with chopping and mixing auger with epicyclic reduction and front bilateral unloading by chains.

Standard equipped with:
1 vertical auger
Spiral thickness of the auger and hopper base of 15 mm
Front bilateral unloading by chains
ESS70: square simple axle 70mm, 1700 track, 6 bolts, without brakes

Capacity: 10 - 14m3

MODELS

V10SCDB

10m3

V12SCDB

V14SCDB

12m3

14m3

Dimensiones

	V10SCDB050	V12SCDB050	V14SCDB050
m3	10	12	14
A	5538	5616	5695
B	3426	3582	3740
C	2550	2550	2550
D	1700	1700	1700
E	1443	1521	1600
F	890	890	890
G	2640	2890	3140
H	450	450	450
J	4095	4095	4095

Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.

Características

Mixer system

Chopping and mixing auger with serrated and rounded blades of high resistance, offering an excellent cut with a minimal effort.

The mixing system is compound by triangular side partition inside the hopper, the augers and the blades attached with the auger. This set creates an unrivalled harmony during mixing of the components by these side partitions that guide the food from the first auger to the second auger while the blades and the augers mixed the food. The design and the structure makes that there is no corner where the food is locked.

Equipped with 8 or 9 blades to the auger.

Bilateral unloading of standard

Front bilateral unloading by chains of standard or on the back optional.

Bilateral unloading conveyor belt

Front or back bilateral unloading by conveyor belt optional.

Bilateral unloading displacable

Bilateral unloading displaced both sides 250mm by chains.

Bilateral unloading displaced right or left side 500mm by chains.

Bilateral unloading displaced right or left side 500m by chain

Bilateral unloading with rampe

Bilateral unloading displaced right or left side 500mm by chains with fixed ramp at right or left side to win hight during the unloading.

Bilateral unloading with elevation

Front bilateral unloading with hydraulic elevation by chains or conveyor belt length 1080, 1280, 1480 or 1680mm.

Note: accessory not valid for road circulation; exceeds maximum allowed width.

Central back unloading

Back direct central unloading with 6 track faucet.

Slot charge

Slot mineral charge.

Material steel or HB450

Spiral thickness of the auger of 15mm, hopper base of 15 mm et hopper lateral of 8 mm.

Spiral thickness of the auger of 15mm made with wear material HB450 in option and/or lateral reinforcement hopper made with wear material HB450.

Drive shaft

Drive shafts ratchet torque limiter.

2 speed gearbox manually operated.
1st input velocity driveshaft 540 rpm and output auger 17,94 rpm.
2nd input velocity driveshaft 540 rpm and output auger 33,01 rpm.

Optional 2 speed gearbox hydraulic operated.

1st input velocity driveshaft 540 rpm and output auger 17,01 rpm.

2nd input velocity driveshaft 540 rpm and output auger 33,01 rpm.

Note: incompatible with the independent hydraulic installation.

Direct hydraulic attack to the tractor.

Epicyclic reduction

Epicyclic reduction relation 1/16,36.

Counter-blades

Equipped with 2 manual counter-blades of standard or with 2 hydraulic counter-blades optional.

Containment ring

Containment ring from the hopper level or containment ring above the level of the hopper with extra height +140mm optional.

Hydraulic optional

Hydraulic distributor manual operated of 2 or 7 functions by remote control by cable or electro-valves of 2 or 7 functions with remote control by radio or cable.

Weight system

ICON weighing system with display integrated with the electro-valves
controller and 3 load cells with diameter 73mm for models with single axle and 5 load cells with diameter 73mm for models with tandem axle.

Optional:

Remote control for ICON weighing system.

Display for ICONweighing system.

Software data log LITE-USB Memory.

Battery charger for ICON weighing system.

Jack-stand

Mechanic jack-stand of standard or hydraulic jack-stand with manual pump optional.

Towing eye Scharmüller

Revolving ring towing eye 903029 of standard not suitable for registration.

Revolving ring towing eye 208858 Scharmüller ISO 5692-1 essential for trailer registration.

Ball towing eye 208863 Scharmüller ISO 24347 essential for trailer registration.

Axle

Square straight axle 70 mm, 1700 track, 6 bolts, without brakes.

Optional wheels

	V10SCDB050	V12SCDB050	V14SCDB050
400/60 -15,5	O	O	O

Registration

Light installation for traffic.
Hydraulic brake simple track with manual load correction valve + mechanic brake.

“A higher quality finish means more machine life”

The Juscafresa finishing process is:

-Polishing of the whole machine removing the impurities that persist in the metal.

-Pressurized washing with degreaser solution to obtain a better grip on the primer and prevent corrosion.

-Wash at high pressure with hot water to remove dirt from the metal and remains of adhered products.

-Application of a high quality primer layer.

-Application of two layers of Juscafresa paint specially designed with our corporate color.