top of page

DLH

SAJ

S11DLH013001
spanish homologation
S15DLH154001

Zero grazer agricultural trailers Juscafresa.

Destined for mowing and forage transport.

Stands out for its system that starts with the movement of the plates that creates air turbulance that helps to move the feed into the bottom of the elevator. During the mower operation, the elevator put the forage on the front part of the trailer, and then the floor chains moves the material from the front to the back part of the trailer.

Standard equipped with:     
Hydraulic installation system to use the elevator
Fodder hydraulic back cover compass type
Bilateral unloading by chains 2160x900 mm and with hydraulic displacement to the back part by hydraulic motor
Cutting width 1900 mm
Hydraulically displaceable drawbar
Axles according to model:
E60: Square simple axle 60mm, 1500 track, 6 bolts, brakes 300x60
EBI70: Rocker axle 70 mm, track 1520, 6 bolts, brakes 300x60 

Capacity: 11 - 17m3

MODELS

S11DLH

11,00m3

S14DLH

S15DLH

S17DLH

14,00m3

15,00m3

17,00m3

Dimensiones
S11DLH
S14DLH
S11DLH
S14DLH
S15DLH
S17DLH
M3
11
14
15
17
A
6820
7520
8020
8520
B
3720
4420
4920
5420
C
2250
2250
2250
2250
D
1500
1520
1520
1520
E
2620
2390
2540
2690
F
1100
1180
1180
1180
G
3040
3120
3120
3120
H
400
450
450
450
I
-
900
900
900
J
2490
2570
2570
2570
K
1900
1900
1900
1900
L
1800
1800
1800
1800
N
640
720
720
720
O
3340
4040
4540
5040
P
6210
6910
7410
7910
Q
-
-
-
-

Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.

Características

Mowing system

The process consists of cutting the fodder by the mower plates which at the same time makes an air turbulence that helps the entrance of the fodder to the bottom of the elevator.

 

The elevator has the function of raising the cut forage towards the front part of the trailer where the material will accumulate and will move towards the rear by the drag chains.

work saj

Plate mower

The top plate has three blades that create air turbulance that helps to move the feed into the bottom of the elevator. 

The lower plates are entirely independent from the top plates and turning by the friction on the ground.

plato segadora

Mower

Mower with 1900mm of cutting width 

segadora 1900

Hydraulic independent system

Hydraulic independent system to use the elevator and dispenser.

The mower has one or two springs providing suspension so it can adapt to the terrain, and therefore avoid excessive friction of the plates on the ground.

instalacion hidraulica

Elevator

The feeder is raised by 6 ou 8 teeth and guided by channels, passing between the blades until the ejection in the body of the trailer. The tines are forked so they can pass through the cutting blades.

noria

Unloading

Bilateral unloading by chains 2160x900 mm and with hydraulic displacement to the back part by hydraulic motor.

The discharge platform moves hydraulically by hydraulic cylinder, being able to choose how to download: back, left or right side.

Fodder hydraulic back cover.

Optional:

Bilateral unloading by conveyor belt 2160x900 mm and with hydraulic displacement to the back part by hydraulic motor

descarga dlh

Drive shaft 

Homokinetic joint front transmission and friction disk clutch.

Back standard transmission and homokinetic joint.

7G7R071CE007W14
7G5R061CEWR7Q11
7G5R061CEWR7Q11

Hydraulic kit

Flow diverter with control button box by cable to operate all the functions.

desviadoras

Button control

Button control with cable connection for all functions.

thh dlh mando

Drag system

Equipped with oval chains of 10mm.

cadena ovalada 10mm

Drawbar

Hydraulically displaceable drawbar.

lanza 17

Axle

050

Square straight axle 60 mm, 1500 track, 6 bolts, brakes 300x90.

E100

Square rocker axle 70 mm, 1520 track, 6 bolts, brakes 300x90.

Optional wheels

S11DLH
S14DLH
S15DLH
S17DLH
15.0/70 - 17
O
-
-
-
480/45 - 17
-
O
O
O

“A higher quality finish means more machine life”

The Juscafresa finishing process is:

-Polishing of the whole machine removing the impurities that persist in the metal.

 

-Pressurized washing with degreaser solution to obtain a better grip on the primer and prevent corrosion.

 

-Wash at high pressure with hot water to remove dirt from the metal and remains of adhered products.

 

-Application of a high quality primer layer.

 

-Application of two layers of Juscafresa paint specially designed with our corporate color.

acabado metal juscafresa

Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.

Galeria
Vídeos
bottom of page