+52 (1) 669 133 2505 +52 (1) 669 159 0889 info@agroexpertjuscafresa.com
Manure spreaders / muck spreaders agricultural trailers Juscafresa.
Destined for large agriculture works / farms.
Stands out for its excellent spread quality, its strongness and extra high load capacity.
Standard equipped with:
Drag system 4 chains 80/12 C 10 + S 275 JR, 80/12X 20 Mn 4 + S 355 JR or 80/18W 27 Mn Cr B5-2 + HARDOX 450
Veritcal beaters of 2 columns chopping type group P 540/390 rpm with screwing flat spikes and height 2200 mm
Hydraulic back cover compass type
Drawbar with springs of 13 leaves
Capacity: 16,82 - 22,98m3
MODELS
E87KMP2
E88KMP2
14,06m3
16,82m3
E95KMP2
22,98m3
Dimensions | E87KMP005001 | E88KMP2005001 | E95KMP2062001 |
|---|---|---|---|
m3 | 1406 | 16.82 | 22.98 |
A | 7860 | 8350 | 10350 |
B | 6340 | 6811 | 8811 |
C | 2526 | 2526 | 2526 |
D | 1900 | 1900 | 2000 |
E | 1760 | 1961 | 2698 |
F | 1550 | 1550 | 1590 |
G | 3003 | 3003 | 3219 |
H | 450 | 450 | 500 |
I | 1300 | 1300 | 1590 |
J | 3258 | 3462 | 3679 |
K | 4798 | 5089 | 6062 |
U | 5500 | 5430 | 7430 |
X | 2130 | 2130 | 2130 |
wheel | 1070 | 1070 | 1250 |
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.
Spreader system
Veritcal beaters of 2 columns chopping type with screwing flat spikes.
Serial speed 540/390rpm or optional 1000/566rpm or 1000/405rpm.
The lower plates are protected by plates in order to avoid the material fall directly to the floor and ensuring it is spread through the back without falling below the machine and getting it dirty.
Symetrical star shape of Beaters and serial screwing flat spikes.
Serial speed 540/390rpm or optional 1000/566rpm or 1000/405rpm.
Spikes
Screwing flat spikes for serial beaters or screwing hand duck spikes for optional beaters.
The screwing hand duck are essential for spreading dry and fine manure without weight like manure hens.
Material steel or stainless
5mm side thickness and 4mm floor thickness.
Floor, laterals, hydrauilc back cover and frontal stainless optional.
Drive shaft Bondioli & Pavesi
Homokinetic joint front transmission and overrunning clutch and back transmission with friction disk clutch.
Drag system
Kit of 4 chains 80/12X manufactured with material 20Mn4+S355JR for models E87KMP2 and E88KMP2 of standard.
Kit of 4 chains 80/18W manufactured with material 27 Mn Cr B5-2 + Hardox 450 for the models E95KMP2 of standard.
Manual independents tensors of standard.
Reducer
Hydraulic advance chains with reducer 1/24,3, for the models E87KMP2 and E88KMP2 of standard.
Hydraulic advance chains with double reducer 1/12,1, for the models E95KMP2 of standard.
Cover
Hydraulic back cover compass type of standars or hydraulic back cover with vertical opening type guillotine with cylinders compensation system optional.
The vertical opening type guillotine can add an indicator door opening for hydraulic back cover.
Channelers sheets
Channelers sheets of manure to direct it where we want.
Lateral height extension panels optional
Laterals height extension panels for forage and cereal 0,4m
Laterals height extension panels for forage 0,5m 1 piece with hydraulic cover. Note: height extension panels equiped with mobil grille for hidraulic cylinder and incorporate water tap of 3 tracks
Laterals height extension panels for forage 0,7m 1 piece with hydraulic cover. Note: height extension panels equiped with mobil grille for hidraulic cylinder and incorporate water tap of 3 tracks
Drawbar and jack-stand
Drawbar with springs of 13 leaves with hydraulic jack-stand with manual pump.
Axle
Available in models E87KMP2 and E88KMP2.
Square rocker axle 100 mm, 1900 track, 10 bolts, brakes 400x80.
Available 150mm in model E95KMP2.
Self-steering bogie suspension axle in second square axle 100 or 150mm, 2000 track, 10 bolts, brakes 400x120.
Optional wheels
E88KMP2005 | E87KMP2005 | E95KMP2062 |
|---|
More options
BOX AND SPREADER GROUP
Change box with height 1470mm to 1270mm. Note: change hydraulic back cover with vertical opening type guillotine with cylinder compensation system included.
Horizontal beaters of 2 columns chopping type and lower plates 1000 rpm.
Bracket preparation to mount height extension panels.
“A higher quality finish means more machine life”
The Juscafresa finishing process is:
-Polishing of the whole machine removing the impurities that persist in the metal.
-Pressurized washing with degreaser solution to obtain a better grip on the primer and prevent corrosion.
-Wash at high pressure with hot water to remove dirt from the metal and remains of adhered products.
-Application of a high quality primer layer.
-Application of two layers of Juscafresa paint specially designed with our corporate color.
Descriptions, data and illustrations are only indicative. Juscafresa reserves the right to make any changes without prior notification.
